Abralon® – for sanding rounded surfaces, corners and sharp edges

Abralon® is a unique multifunctional patented sanding material developed for flexible sanding of both smooth and profiled surfaces. Abralon® creates a smooth sanding pattern on angled surfaces and edges, while minimising the risk of pressure marks.

The open cell structure is used to keep the water in Abralon® during the sanding operation. The water is not thrown out and a smaller amount of liquid can be used. The foam provides an even surface pressure to the abrasive fabric regardless of the form variations of the sanded material. This prevents the abrasive fabric from cutting through the lacquer layer, for example at sharp edges and roundings.


The perfect sanding and processing material with versatile application possibilities on surfaces as new and old lacquers, plastics, primers and fillers.

Abralon® is used for conditioning a surface either as a pre-treatment prior to painting and lacquering, for removing oxides or for giving a visually attractive surface structure. Abralon® is mainly used with wet sanding, but can also be used as dry in coarser grits.

Bowling Ball Maintenance

Bowling balls absorb oil every time they are thrown, decreasing friction and hook-ability on the lane. You should […]

RV & Auto - Paint & Body

If you need of a sanding disc that will work well on unusually-shaped items or surfaces that are curved […]

Glass Scratch Removal

Abralon® Pads do not generate excessive heat that requires a wet slurry to reduce heat as you work […]

Technical Specifications:
Grain Silicon carbide
Bonding Special resin
Backing Knitted fabric on foam
Coating Special ABRALON® method
Colour Grey
Grit range 180, 360, 500, 600, 1000, 2000, 3000, 4000